Shop

Jigs for manual processing.
Assists in drilling 1 mm diameter holes on the end face and side of a round bar.
-Compatible with plastic round bars with diameters of 2, 3, 4, and 5 mm

A jig for making straight holes in the core (end face) and side of a plastic round bar.
For 1mm diameter drill bit only.
If you want to drill a hole smaller than 1mm in diameter, please use a drill bit with a 1mm shaft and a small diameter tip (However, the total length of the blade must be 18mm or more for core and end face processing).

Please match the plastic rod itself to the specified size for high-precision processing.
Example: When using a 2.0mm hole, 2.00 to 2.05mm is possible.

When using for the first time, it is necessary to pass through the hole for the drill.
By inserting a 1mm size drill, you can remove the excess plating thickness inside the drill hole.

Be sure to use a drill bit of the specified size. The inner wall of the hole may be scraped and the accuracy may drop, and the blade may not come off.
There may be scratches on the surface that do not affect use. Please note

[Product specifications]
-Size: W25mm x D30mm x H8mm
-Material: Brass (nickel plated)
– Processable material: plastic
-Country of origin: Japan